Digital data sets were compiled by the U. S. Geological Survey (USGS) and used as input for a collection of Spatially Referenced Regressions On Watershed attributes for the Chesapeake Bay region. These regressions relate streamwater loads to nutrient sources and the factors that affect the transport of these nutrients throughout the watershed. A digital segmented network based on watershed boundaries serves as the primary foundation for spatially referencing total nitrogen and total phosphorus source and land-surface characteristic data sets within a Geographic Information System. Digital data sets of atmospheric wet deposition of nitrate, point-source discharge locations, land cover, and agricultural sources such as fertilizer and manure were created and compiled from numerous sources and represent nitrogen and phosphorus inputs. Some land-surface characteristics representing factors that affect the transport of nutrients include land use, land cover, average annual precipitation and temperature, slope, and soil permeability. Nutrient input and land-surface characteristic data sets merged with the segmented watershed network provide the spatial detail by watershed segment required by the models. Nutrient stream loads were estimated for total nitrogen, total phosphorus, nitrate/nitrite, amonium, phosphate, and total suspended soilds at as many as 109 sites within the Chesapeake Bay watershed. The total nitrogen and total phosphorus load estimates are the dependent variables for the regressions and were used for model calibration. Other nutrient-load estimates may be used for calibration in future applications of the models.
This spatial data set representing slope was created and used by the USGS in the initial applications of the SPARROW models in the Chesapeake Bay watershed (Version 1.0). The slope data was also used with Version 2.0 and Version 3.0 of the SPARROW models in the Chesapeake Bay watershed.
Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Geological Survey.
Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in ARC/INFO format, this metadata file may include some ARC/INFO-specific terminology. Users are cautioned not to be confused by this terminology. This metadata file should contain enough information to eliminate any confusion caused by the use of ARC/INFO-specific terminology.
Slope for the Chesapeake Bay watershed was calculated from a 1-kilometer grid- cell DEM (Verdin, 1997) generated by the USGS. The area containing the Chesapeake Bay watershed was extracted, and the slope function in Arc/Info's GRID module was used to create a 1-kilometer floating-point grid with slope values from each cell ranging from 0 to 125 percent (Figure 11). An average percent slope for each SPARROW watershed was then calculated by using the zonal functions of GRID. This data can be found in the INFO table SLOPE.MEAN
Although these data have been used by the U.S. Geological Survey, U.S. Department of the Interior, no warranty expressed or implied is made by the U.S. Geological Survey as to the accuracy of the data.
The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the U.S. Geological Survey in the use of this data, software, or related materials.
Generated by mp on Tue Sep 22 13:02:31 1998